Exergy Fuel System Saver Improved Stock Inlet Metering Valve (FCA/MPROP) - E05 60505
E05 60505
Pricing:
$295.00
Description
Are you concerned about the possibility your CP4 could fail and damage your injectors as well as contaminate the rest of your high pressure system? Our System Saver VW TDI Inlet Metering valve (also called FCA and MPROP) offers an affordable option to help protect your high dollar fuel system components.
Starting with a new inlet metering valve from Bosch we replace the factory single layer 85 micron inlet screen that is molded in a plastic frame with one of our own design. The Exergy screen is mounted on a stainless steel frame that will not fail when the screen fills with debris and becomes a restriction. It also has two layers of 10 micron screen. Not only is the screen over eight times finer than the factory screen, but the addition of another layer further increases protection from debris.
Based on a number of injector sets we have tested from systems with a failed CP4 pump with a System Saver installed it appears that injector survivability is increased more than 85% when compared to CP4 failures with the factory screen.
Should the pump actually fail we recommend replacing the pump, and not replacing the injectors unless there are injector related symptoms present after the install.
The System Saver Inlet Metering Valve is also a wise upgrade should the valve need to be replaced to address traditional metering valve failure modes such as idle surge and excessive rail pressure fluctuations.
Please note that a valve cannot be returned after it has been installed.
Details
- E05 60505
- E05 60505
- New
Categories
Shipping Information
- Item Requires Shipping
- 5.0 lbs.
- W6.0000” x H6.0000” x L6.0000”
Customer Reviews
Total Reviews (1)
You must login to post a review.
Reviewed by: Naithien10/04/2024 10:45PM
Product ownership: Less than 1 week
Purchased from: Exergy Performance
Comments:
I discovered this product through some social media groups I'm in and knew it was under development and testing for a while. When I found out it was available, I immediately placed an order. I'm really glad there's a plug and play option without installing more filters, etc to protect the fuel system. Installation is super simple and takes less than15 mins. Installed on stage 2 CJAA, 2012 JSW. Car has 189k miles on it: OE fuel pump.
Doing a 1k road trip this weekend and excited to see how it does.
PROS:
Really attentive Customer service
Quick Shipping
Direct install and comes with hardware
Stock appearance
CONS: None